Test Your Printer Before Buying
Free · ~3 g TPU · ~15 min printD440RC TPU tire inserts rely on single-wall perimeters, thin internal spokes, 0 top/bottom layers, 4%–8% gyroid infill (depending on your desired softness), and a built-in breakaway support ring. Print this compact 26.8 × 10 mm mini tester first to verify your printer and TPU filament profile are dialed in before purchasing a full set.
- Includes pre-configured
.3mfproject files for Bambu Studio, OrcaSlicer, PrusaSlicer, and Cura - Zero-support print: peel off the inner breakaway support ring after printing
- Raw
.stlalso included if you use another slicer or custom printer profile
1. What TPU Hardness Are You Printing?
2. Select Your Slicer
Included Slicer & Filament Settings (Generic 90A+ TPU · Bambu Studio)
Use these exact values if adapting for another printer or slicer| Setting | Value | Why It Matters |
|---|
What to Check After Your Test Print Finishes
- Peel-off support ring: Pops cleanly off the bottom inner rim with fingers or pliers.
- Spokes & zigzag walls: Single-line walls bond cleanly with zero gaps or heavy stringing.
- Exposed gyroid infill: Top and bottom faces are open (0 top/bottom layers), letting the 4%–8% gyroid infill (depending on your desired softness) compress smoothly.
